Welcome to Signmax.us Forum
WinPCSIGN BASIC - PRO Welcome to Signmax.us Forum
Author Message

<  Vinyl Cutter sign making   ~  Cutting problem with my Graphtec

DanaS
Posted: Wed Nov 14, 2012 7:07 pm Reply with quote
Joined: 16 Feb 2011 Posts: 8
Hi, I have Graphtec plotter and my problem is: Something is sized within the artboard, for example, 2”x2” and it seems to be reading it as feet or something and cutting things way too big. Do you have suggestion at all ? Thank you.[/size]

Le logiciel lance bien la découpe, en revanche, les dimensions indiquées ne sont nullement respectées. La découpe d'un simple rectangle est beaucoup plus importante que les dimensions indiquées.

El software se inicia bien, sin embargo, las dimensiones indicadas de ninguna manera se respetan en el corte. Un rectángulo 2x2 pulgadas se corta mucho más grande que las dimensiones indicadas.
View user's profile Send private message
Ivan
Posted: Wed Nov 14, 2012 8:54 pm Reply with quote
Joined: 19 Apr 2007 Posts: 352 Location: Montreal
This problem is related to the plotter scale Setting the Step Size). You need to change it in the cutter. If the machine is working in mm, you must change the value to 0.025. But if you are working in inches change to 1016.
The resolution of the plotter must be set. In this case, it will probably be best to set the resolution (also called Step Size) to .025mm or 1016 points per inch.
You can also change this value in the software. From WInPCSIGN, select Setting, Plotter code, Commands and enter the value 90.00 or other in the X&Y axis:

Ce problème est lié à l'échelle du traceur (Setting the Step Size). Vous devez le changer dans le decoupeur. Si la machine travaille en mm vous devez changer la valeur à 0,025. Mais si vous travaillez en pouces, passez à 1016.
Vous pouvez également modifier cette valeur dans le logiciel. Dans WinPCSIGN, sélectionnez Configuration, Découpeur, Commandes... et entrez la valeur 90.00 ou autre dans X & Y Axis:

CAUTION: Graphtec in WinPCSIGN, must be set to GPGL. Check your manual for instructions on how to switch between HPGL to GPGL,
Here is a video

If this bothers you, select any Roland driver from WinPCSIGN/Setting/Plotter code

_________________
Ivan Polanco, Sales manager/Support
Signmax.us Profesionnal signmaking ressources
View user's profile Send private message Send e-mail Visit poster's website

Display posts from previous:  

All times are GMT
Page 1 of 1
Post new topic

Jump to:  

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum